Make Circuit Board Laser Range Finder

Make Circuit Board Laser Range Finder

By virtue of 0.1mm laser drilling, 100% AOI detection between layers, tightly controlled multi-layer compression equipment, super-speed flying-probe tester, and the quality of Laser Range Finder PCB Circuit Board is guaranteed powerfully from hardware and details.

Product Details

Make Circuit Board Laser Range Finder

Basic information about the product:

Product code: 2G2426A0-PCBA

Product use: electrical drive machine

Pcb sheet information: double sided FR4, plate thickness 1.6MM, copper thickness 1OZ lead-free spray tin black oil white, perforated cover oil, single piece size 54*35.5MM

Inspection method: full inspection

Order production quantity: 30pcs

Production cycle: 3 days


make circuit board



Product process description:

Process technology: lead-free process

Product process flow: SMT+DIP+ packaging

Solder paste requirements: special low flux residual solder paste (STN-Sn96.5Ag3.0Cu05 TYPE: 836)

A/B side: priority production B side (definition bit number)

Welding method: fixture wave soldering. 1: The temperature of the soldering iron is controlled between 330 °C and 380 °C. 2: The connector on the circuit board cannot be soldered, and the left and right are skewed and raised. 3: The tin point of the circuit board should be full and bright, and there should be no sharpening, less tin, bubble holes and excessive amount of solder paste.


pcb manufacture

Previous:Surface Mount Pcb Assembly Next:Router High Precision Pcb manufacture

Inquiry