pcb china electronic printed circuit board
|Material||Laminate material||FR4, Alu, CEM3,Taconic,Rogers|
|Board cutting||Number of layers||1-58|
Min.Thickness for inner layers
(Cu thickness are excluded)
|Bow and twist||<7/1000|
|Copper weight||outer Cu weight||0.5-4 oz|
|inner Cu weight||0.5-3 oz|
|PTH hole tolerance||±0.002''(0.005mm)|
|NPTH Hole tolerance||±0.002''(0.005mm)|
|Plating||Min hole size||0.0008''（0.02mm）|
|Aspect ratio||20(5 :1)|
|Min solder mask clearance||0.003''(0.07mm)|
|E-test||Flying probe tester||Y|
The Electronic Printed Circuit Board is an electronic circuit used in electronic devices to provide mechanical support and access to its electronic components. It is made by combining different sheets of non-conductive material, such as fiberglass or plastic, to easily hold the copper circuit.
According to the number of circuit boards, it can be divided into single-panel, double-panel, four-layer, six-layer and other multi-layer boards.
Since the printed circuit board is not a general terminal product, the definition of the name is slightly confusing. For example, the motherboard for the personal computer is called the motherboard, and cannot be directly called the circuit board. Although there is a circuit board in the motherboard, It's not the same, so when you evaluate the industry, you can't say the same thing. For example, because the integrated circuit parts are mounted on the circuit board, the news media called him an IC board, but in essence he is not equivalent to a printed circuit board. We usually say that the printed circuit board refers to the bare board - that is, the board without the upper components.