High Frequency FR2 Double Circuit Board
Product features:
High Frequency FR2 Double Circuit Board uses VPC (Vertical Continuous Plating) at the time of fabrication to ensure a smooth and uniform plating surface. We first exposed the Gerber circuit to the film when we made the product, and then we made the PCB based on the film. At the same time, we keep the workshop clean all day to ensure the accuracy of the exposure. For multi-layer panels, we use AOI equipment for internal inspection to ensure internal quality. This High Frequency FR2 Double Circuit Board has a very good resistance value to help provide good electrical conductivity. High Frequency FR2 Double Circuit Board has a thick enough copper coating in the holes to ensure that the resistance is within the process requirements.
Product specifications:
Type: rigid, flexible
Material: FR2, CEM1, CEM3, aluminum, high frequency board,
Layer: 2
Shape: retangular
Cutting: cut, V-score, Tab-routed
Plate thickness: 0.2-4mm, conventional 1.6mm
Copper thickness: 0.5-4oz, regular 1oz
Solder Mask: Green
Screen: white, black, etc.
Minimum line width of the screen: 0.006 inches or 0.15 mm
Minimum trace/gap: 0.1mm or 4mils
Minimum bore diameter: 0.01", 0.25mm or 10 mil
Surface treatment: HASL, ENIG, OSP, etc.
